Request A Quote
Features
| FEATURES | BENEFITS |
| Working Widths | 40" to 50" |
| Weight | 510 lbs. Heavy construction helps penetrate ground. |
| 2" Square frame tube | Frame tubing is stronger than angle iron. |
| Adjustable gang angles | Cutting aggressiveness can be adjusted on the front and rear up to 21 degrees. |
| 3" x 2" Gang tube, 1" sq. gang axles, high carbon steel | high carbon square axles offer great strength in punishing conditions. |
| 16" Notched disc blades | Notched blades for aggressive digging and cutting action. |
| 3/8” Thick bearing hangers | Heavy-duty hangers resist the high torque from U-bolts. |
| Self aligning sealed bearings | Self-aligning bearings offer long life while pounding through hard ground. |
| Rear Roller | 40 7/16" Packing width, Pivots for storage without taking spreader off unit. |
| Spin Spreader Deflector | Allows to reduce seed dispersion width down to 48" |
| Seed hopper height | Loading height (42") for easy of use. |
| Spin Spreader Restrictor Plate | Allows smaller seed to be run through the spreader at a lower volume per acre. |
Specifications
| Model | FPS48 |
| Hitch Type | Pull type with optional 2" ball hitch or clevis hitch |
| Base Unit Weight | 370 lbs. |
| Base Unit Weight | 510 lbs. (With Spin Spreader and roller.) |
| Hitch Weight | 170 lbs. (In transport position with roller up and 100 lbs in Spin Spreader hopper.) |
| Hitch Height with Tongue Level | Adjustable from 15 1/2" to 31" with wheels in transport position. Adjustable from 9 5/8" to 21 3/4" with discs sitting on the ground. |
| Disc Cutting Width | 40" to 50" |
| Minimum ATV Size | 350 cc |
| Minimum Tractor/vehicle Size | 17 hp |
| Height | 52" |
| Length | 104" |
| Width | 54" |
| Weight Load on Each Disc | 46 lbs. |
| Number of Disc Blades | 8 |
| Disc Blade Size & Type | 16" Notched |
| Blade Spacing | 7 1/2" |
| Transport / Gauging Tires | 13" Diameter 4 ply tubeless |
| Bearing Hanger | 3/8" Plate |
| Bearing Type, 2 per Gang | Self Aligning, Sealed Bearing |
| Gang Tube | 3" x 2" |
| Gang Axle | 1" Square high carbon steel |
| Disc Angle | Front Gang: 0, 7, 14 & 21 degrees Rear Gang: 0, 7, 14 & 21 degrees |
| Frame Construction | 2" x 2" Square tubular design |
| Lifting Device | Ratchet Jack or 12 volt Linear Actuator |
| 12 Volt Actuator Amperage | 34 amps at startup. 28 amps during normal operation. |
| Rear Axle pivot Type | Greasable |
| Rear Roller Bearing | Greasable |
| Optional Spin Spreader and Packer | |
| Packer Roller Width | 40 7/16" |
| Spreading Device | Spin Spreader, 12V |
| Spreader Hopper Loading Height | 42" off ground |
| Spin Spreader Volume/Capacity | 2 cu. ft. (15 gallons) (100 lbs. Maximum capacity weight) |
| Wide Spread Pattern Without Deflector |
20 to 25 ft. (Actual spread pattern is dependent upon product type and condition during application.) |
| Spin Spreader Deflector | Diverts seed to smaller spreading width. Seed rate charts calculated at 48" |
| Small Seed Restrictor | Restricts small seed for smaller distribution levels. |
| Fuse Rating 15 AMPS maximum Start-Up Amps 4 Amps (Spreading Material) Normal Operating Amps .5 Amps (Spreading material) |
15 AMPS maximum 4 Amps (Spreading Material) .5 Amps (Spreading material) |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.