Request A Quote
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| 110 HP gearbox | A rugged heavy built gearbox capable of handling heavy cutting applications. |
| Cat. 4 drive-line with 4 plate slip-clutch | Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in the blade path. Standard slip-clutch offers convenience over shear-bolts. |
| Cat. l or ll 3-point hitch | Allows use on a wider variety of tractors. |
| Lower clevis type 3-point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Heavy 10 gauge deck construction | Can withstand more abuse than lighter gauge decks. |
| 1/4" Side panels for overall reinforcement | Also protects sides from debris being thrown against them from the blades. |
| Fully welded deck | Robotically welded. Adds additional strength and reduces rust. |
| Extended front tapered deck | Contains and discharges material better. |
| Round back design | Allows for more efficient handling and dispersing of material. |
| 9" Deck Height | Allows cutter to handle heavy cutting conditions. |
| 2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| High cutting capacity | Can cut brushy areas with saplings up to 3". |
| Full length skids with replaceable shoes | Full length skids protect side plate structure, replaceable shoes for convenience. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 3/16" Round stump jumper | Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft. |
| High blade tip speed | 60" =12,384 fpm and 72" = 14,861 fpm |
| 3" Dia. cutting capacity | Can aid in clearing brush. |
| Rugged laminated tail-wheel | Can't go flat. Choice of single or dual combination. |
| Chain or rubber shield option | Located on front and rear. Reduces flying debris. |
| Drive-line Holder | Keeps drive-line up out of dirt. Easier hook up of drive-line. |
Specifications
| Model | RCR2660 |
| Machine Weight (with Chain Guards) | 1002 lbs. |
| Hitch | Category l or ll Quick Hitch Compatible with Floating Top Link, Quick Hitch Ready |
| Cutting Width | 60" |
| Overall Width | 67" |
| Overall Length (Including Tailwheel) | 110" |
| Deck Height | 9 1/8" (Bottom of Deck to Bottom of Skid Shoe) |
| Cutting Height | 2" - 12" |
| Cutting Capacity | 3" |
| Recommended Tractor HP | 35-130 maximum |
| PTO Speed | 540 rpm |
| Gearbox | 540 rpm PTO Driven Gearbox 1:1.46 Speed-Up Beveled Gears Cast Iron Housing |
| Gearbox Lubrication Capacity & Type | 7 pints of 80-90W EP oil |
| Gear box Input/ Output Shaft Size | Input Shaft = 1 3/8" - 6 Spline Output Shaft = 2" Dia. |
| Deck Construction | All welded construction |
| Deck Material Thickness | 10 Gauge |
| Side Panel Thickness | 1/4" |
| Skids | Replaceable |
| Stump Jumper | Round Pan 3/16" x 24" |
| Blades (2) | 1/2" x 4" x 25" Heat Treated Alloy Steel Free-Swinging High Lift |
| Blade Bolt | Keyed with harden flat washer and lock nut |
| Blade Tip Speed | 12,384 fpm/788 rpm |
| Drive-line | ASAE Category 4 |
| Drive-line Protection | 4 Plate Slip Clutch |
| Tail-wheel Mount Assembly | Welded arm and Caster Fork |
| Tail-wheel | 4.00 x 8 x 15 Laminated Tire with cast iron hub and tapered roller bearings |
| Front Guard | Optional: Chain Guard Available through Parts Department: Rubber Guard |
| Rear Guard | Optional: Chain Guard |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.