Request A Quote
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures. |
| 540 or 1000 RPM | Fits wider variety of tractors. |
| High Gearbox HP rating | Gearboxes are built rugged. See Specifications for actual Gearbox HP ratings. |
| 3 Gearboxes | Allows equal torque to be spread to left and right gearbox. |
| Splined rubber flex-couplers between the center and outboard gearboxes | Protects the driveline and gearboxes from hard objects in the blade path. |
| Pull-Type constant velocity driveline Option | Constant velocity driveline reduces chatter and extends life of U-joint during turns. |
| Slip-clutch protection on main driveline | Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact. |
| 8'- Cat. 1 & 2 or 10'- Cat. 2 & 3 3-Point & Semi-mount Hitches or Pull-type Hitch | Fits a wide range of tractors. Semi-mount and Pull-type fit older tractors without a top link and smaller tractors without enough lift capacity. |
| 10 Gauge deck, fully welded | Fully welded deck adds rigidity. |
| 1/4" Thick sidewalls | Protects sidewalls from thrown objects. |
| Round back design | Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out. |
| Pull-type w/dual leveling rods | Dual leveling rods eliminate deck twisting when going over uneven terrain. |
| Chain or rubber guard option | Reduces flying debris. |
| Full length skids with replaceable shoes | Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece. |
| Splined blade hub | Splined blade hub offers tight non-slipping attachment to output shaft. |
| 3/16" Round stump jumper | Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft. |
| 1" x 5" Blade bar | Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft. |
| 1/2" x 4" Heat-treated blades | Heat-treated blades last longer than non-heat-treated blades. |
| 3" Diameter cutting capacity | Aids in cutting brush. |
| High blade tip speed | Means cleaner cutting. |
| Laminated tires | Laminated tires can handle almost any condition and don't go flat. |
| Quick-Hitch adaptable | 3-point and semi-mount are Quick-hitch adaptable. |
Specifications
| Model Numbers | RCF3696 (540 rpm) RCFM3696 (1000 rpm) |
| Machine weight with front & rear rubber guards. Includes hydraulic cylinder & 21" wheels with semi-mount and pull type units |
3-Point mount = 1,750 lbs. (793.8 kg) Semi-mount = 1,915 lbs. (868.6 kg) Pull-type = 2,090 lbs. (948.0 kg) |
| Hitch | 3-Point & semi-mount Category 1 & 2 Quick Hitch Adaptable Pull-type - with dual self level rods |
| Pull type tongue weight | 933 lbs. (423.2 kg) |
| Park jack | Parking jack attaches to the tongue of the pull type cutter |
| Cutting width | 8' - 0" (2.44 m) |
| Overall width | 8' - 7" (2.62 m) |
| Overall length 3-point mounted semi-mounted pull-type |
8' - 10" (2.69 m) 9' - 5" (2.87 m) 12' - 5" (3.78 m) |
| Deck height | 13" (33.0 cm) |
| Cutting height | 2" - 12" (5.1 cm - 30.5 cm) |
| Cutting capacity | 3" (7.6 cm) |
| Tractor Hp rating | Lift-type - 50 - 130 (37.3 - 96.9 kw) Semi mount - 40 - 130 (29.8 - 96.9 kw) Pull-type - 35 - 130 (26.1 - 96.9 kw) |
| Gearbox horsepower rating | T-Box - 210 hp (156.6 kw), outboard 205 hp (152.9 kw) |
| Gearbox | 540 rpm or 1000 rpm driven gearbox. Cast iron housing, beveled gears |
| Gearbox input / output shaft size | Input shaft = 1 3/4" (4.4 cm) - 20 spline Output shaft = 2 3/8" (6.0 cm) Dia. |
| Gearbox lubrication | 80-90w EP gear lube |
| Gearbox oil capacity end boxes T-box |
Omni = 5.5 pints (2.60 L) or Comer = 10 pints (4.73 L) Comer = 4.5 pints (2.13 L) |
| Deck material thickness | 10 gauge (3.4 mm) |
| Deck side skirt thickness | 1/4" (6 mm) |
| Skids | Replaceable |
| Stump jumper | 2 ea. - 3/16" (5 mm) Round pan |
| Blades (4) | 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated Free-swinging suction blades |
| Blade bolts | Keyed with harden flat washer and locknut |
| Blade tip speed | 540 rpm 17,100 fpm (86.9 mps) 1000 rpm 17,400 fpm (88.4 mps) |
| Driveline 3-point & semi-mount pull type |
ASAE Cat 4 ASE Cat. 4 equal angle shaft or constant velocity u-joint |
| Driveline protection | 540 rpm - 4 plate slip clutch, Rubber flex coupler to wing boxes 1000 rpm - 2 plate slip clutch, Rubber flex coupler to wing boxes |
| Tailwheel options 3-point without rear axle: 2 tires 3-point with rear axle: 2 tires semi-mount: 2 tires pull-type w/single spindle: 2 tires pull-type w/dual spindles: 4 tires |
4" x 8" x 15 1/4" Caster laminated 4" x 8" x 15 1/4" Caster laminated or 6" x 9" x 21" caster laminated 4" x 8" x 15 1/4" Caster laminated or 6" x 9" x 21" caster laminated 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft |
| Wheel bearings | Tapered roller bearing in cast iron hub |
| Shock absorption | Spring shock absorber on axle of semi-mount & pull type |
| Front guard | Optional: Rubber deflector, single chain guard, or double chain guard |
| Rear guard | Optional: Rubber deflector, single chain guard, or double chain guard |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.