Request A Quote
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| 130 HP gearbox | A rugged heavy built gearbox capable of handling heavy cutting applications. |
| Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
| Cat. 4 driveline with 4-plate slip-clutch | Slip-clutch driveline offers convenience for continual work. |
| Lower clevis type 3-point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Heavy 10 gauge deck construction with 1/4" side skits | Can withstand more abuse than lighter gauge decks. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Fully welded deck | Adds additional strength. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| 11 1/4" Deck Height | Allows cutter to handle heavy cutting conditions. |
| 1 1/2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| High cutting capacity | Can cut brushy areas with saplings up to 3". |
| Skid shoes | Provides sidewall reinforcement and protection to bottom of sidewall. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 3/16" Plate stump jumper | Standard round stump jumper slides over stumps, rocks and debris. |
| High blade tip speed RCF2760 = 12,384 FPM RCF2772 = 14,861 FPM |
Ensures clean cut. |
| Laminated tailwheel | Laminated material is long lasting in rough conditions. |
| 4" x 15" Solid rubber tailwheel | Can't go flat. |
| 1 1/2" Heavy-duty spindle on tailwheel | Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. |
| Optional Guarding | Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and single chain guarding on the back. |
| Driveline Holder | Keeps driveline up out of dirt. Easier hook up of driveline. |
Specifications
| Model Numbers | RCF2772 |
| Machine Weight | 1,072 lbs. (486.3 kg) With front and rear Single Chain Guards |
| Hitch | Category I or II with floating top linkage, Quick Hitch ready |
| Cutting Width | 72" (1.83 m) |
| Overall Width | 79" (2.01 m) |
| Overall Length | 121 3/4" (3.09 m) |
| Deck Height (Bottom of Deck to Bottom of Skid Shoe) | 11 1/4" (28.6 cm) |
| Cutting Height | 1 1/2" - 12" (3.8 cm - 30.5 cm) |
| Cutting Capacity | 3" (7.6 cm) Diameter |
| Recommended Tractor hp | 35-130 hp (26.1-96.9 kw) |
| Power Take-Off Speed | 540 rpm |
| Gearbox | 540 rpm power take-off driven gearbox, 1:1.44 speed-up beveled gears, cast iron housing, 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft |
| Gearbox Lubricant | EP 80-90W oil |
| Gearbox oil Capacity | 7 pints (3.31 L) |
| Deck Construction | All welded deck |
| Deck Material Thickness | 10 Gauge (3.4 mm) |
| Side Skirt Material Thickness | 1/4" (6 mm) |
| Skid Construction | Replaceable bolt on skid shoes |
| Stump Jumper | 3/16" x 30 1/2" (0.5 cm x 77.5 cm) Round Pan |
| Blades (2) | 1/2" x 4" x 29" (1.3 cm x 10.2 cm x 73.7 cm) Heat treated alloy steel free-swinging high lift |
| Blade Bolts | Keyed with harden flat washers & locknuts. |
| Blade Tip Speed | 14,861 FPM (75.5 mps) |
| Driveline | ASAE Category 4 |
| Driveline Protection | 4 plate slip clutch |
| Tailwheel Mount Assembly | Welded A-arm and caster fork with 360 degree swivel |
| Tailwheel | 4.00" x 8" x 15" (10.2 cm x 20.3 cm x 38.1 cm) Laminated tire with cast iron hub and tapered roller bearings |
| Front Guard | Optional: Rubber Belting or Single Chain Guard |
| Rear Guard | Single Chain Guard |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.