Request A Quote
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
| Cat. 3 driveline with shear-bolt Option | Shear-bolt offers maximum driveline protection. |
| Cat. 3 driveline with 2-plate slip-clutch Option | Slip-clutch driveline offers convenience for continual work. |
| Dual position clevis type 3-Point floating top link | Permits deck to follow the terrain for an even cut. |
| Lower clevis type 3-Point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor's lower arms, vs. pulling on a single pin design. |
| Heavy 10 gauge deck & side skirt construction | Can withstand more abuse than lighter gauge decks. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Fully welded deck | Adds additional strength. |
| Extended cutter front | For increased material flow and added protection. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| Deck Height | 9 11/16" Deck height on 60" and 11" deck height on 72" model Allows cutter to handle heavy cutting conditions. |
| 1 1/2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| Full length skid shoes | Provides sidewall reinforcement and full protection to bottom of sidewall. |
| 1/2" x 3" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| 10 Gauge stump jumper | Standard round stump jumper slides over stumps, rocks and debris. |
| High blade tip speed | Ensures clean cut. |
| 15" Laminated tailwheel | Laminated material is long lasting in rough conditions. Can't go flat. |
| 4" x 16" Solid rubber tailwheel | Can't go flat. |
| 1 1/4" Heavy-duty spindle on tailwheel | Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. |
| Optional Guarding | Protect against flying debris. Customer can choose to include single chain or rubber guarding on the front and back. Rear Metal Band standard on the back. |
| Driveline Holder | Keeps driveline up out of dirt. Easier hook up of driveline. |
Specifications
| Model Numbers | RCF2072 |
| Machine Weight | 745 lbs (337.9 kg) With laminated tail-wheel, slip clutch drive-line, Front Rubber Guards and Rear Metal Band. |
| Hitch | Category l with floating top linkage, Quick Hitch ready |
| Cutting Width | 72" (1.83 m) |
| Overall Width | 77" (1.96 m) |
| Overall Length | 109 1/2" (2.78 m) |
| Deck Height (Bottom of Deck to Bottom of Skid Shoe) |
11" (27.9 cm) |
| Cutting Height | 1 1/2" to 12" (3.8 cm to 30.5 cm) |
| Cutting Capacity | 2" (5.1 cm) Diameter |
| Recommended Tractor hp | 20-65 hp (14.9-48.5 kw) |
| Power Take-Off Speed | 540 rpm |
| Gearbox Ratio | 1:1.47 |
| Gearbox Construction | Speed-up beveled gears, cast iron housing, 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft |
| Gearbox Lubricant | EP 80-90W oil |
| Gearbox oil Capacity | 4 Pints (1.89 L) |
| Deck Construction | All welded deck |
| Deck Material Thickness | 10 Gauge (.134")(3.4 mm) |
| Side Skirt Material Thickness | 10 Gauge (.134")(3.4 mm) |
| Skid Shoes Standard Accessory | Full length weld-on skid shoes 1/4" x 2 1/2" x 18 7/16" (6 mm x 6.4 cm x 46.8 cm) Long bolt-on replaceable skid shoes (Bolts to weld-on skid shoes) |
| Stump Jumper | 10 GA. x 24" (3.4 mm x 61.0 cm) Round Pan with 1" (2.5 cm) thick blade holder bar |
| Blades (2) | 1/2" x 3" x 31" (13 mm x 7.6 cm 78.7 cm) Heat treated alloy steel free-swinging high lift |
| Blade Bolts | Keyed with harden flat washers & lock nuts. |
| Blade Tip Speed | 14,955 FPM (76.0 mps) |
| Drive-line | ASAE Category 3 |
| Drive-line Protection Optional Optional | Shear-bolt protection 2 Plate slip clutch |
| Tail-wheel Mount | Welded A-arm and caster fork with 360 degree swivel |
| Whitetail Optional Optional | 4" x 8" x 15" Laminated tire with cast iron hub 4" x 16" Molded rubber tire |
| Front Guard Optional Optional | Rubber Belting Single Chain Guard |
| Rear Guard Standard Optional Optional | Metal Band Rubber Belting Single Chain Guard |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.