Request A Quote
Features
| Features | Benefits |
| Quality hydraulic motor available in two volume flows | Provides long life, durable construction. Two flow options allow the trencher to fit many skid steers. |
| Reversible motor | Helps in areas where rocks may lodge and stop chain, can back out and try again. |
| Boom ball bearings are selfcontained ball bearing with triplelip seals and metal shroud covers | Boom ball bearings are protected against dirt invasion and do not require greasing. |
| Drive bearings are self-contained, single & double row ball bearings with extra heavy duty seals. | Drive bearings are protected against dirt invasion and do not require greasing. |
| Motor case drain | Reduces back pressure at motor thus delivering more power for trenching. |
| Hardened cup teeth | Increase life and productivity of the teeth. |
| High tensile strength trencher chain | Chain stands up to rugged use. |
| Trencher chain side links | Designed for anti-flex without binding or piggybacking. |
| Full length bolts securing teeth with spacers at every station. | Helps to distribute load equally on both sides of the chain. Minimizes chain wear. |
| Side shifts from center to 22" to the right | Allows the operator to get up close to buildings and fences. |
| Grease cylinder chain tightener | Makes tightening the chain easy |
| Connect under pressure hydraulic couplers | Couplers are easier to connect and disconnect. |
| Removable spoil auger | Helps dig a trench closer to fences and buildings |
| Floating crumber shoe | Improves the performance of the crumber shoe. |
| Depth indicator (Patent-pending) | Helps the operator judge the depth of trench from the operator's seat. |
| Numerous chain options | Plenty of options to choose from to match your local digging conditions. |
| Heavy frame construction | Stands up to rugged use. (5/16" Thick hitch plate with 3/4" reinforced bar around three sides of the bottom lock pin slots.) |
| TR48: 4' digging depth TR60: 5' digging depth | Customer can choose which trencher best suits his/her needs. |
| 221-373 fpm chain speed (Skid steer hydraulic flow and pressure ratings vary.) | Good operating speed to get the work done. |
Specifications
| Model Number | TR60 |
| Operating weight With 2 pitch cup chain and hydraulic side shift. | 1300 lbs (589.7 kg) |
| Overall length | 102.5" (2.60 m) |
| Standard boom length | 77.5" (1.97 m) |
| Digging depth at 60 degrees | 5 ft (1.52 m) |
| Frame width w/step | 61.13" (1.55 m) |
| Overall width | 64" (1.63 m) |
| Overall height | 34.1" (86.6 cm) |
| Auger diameter | 15.5" (39.4 cm) |
| Auger clearance | 28.5" - 30.5" (72.4 cm - 77.5 cm) |
| Side shift options Manual Hydraulic |
Side shifts from center to 22" (55.9 cm) right of center Side shifts from center to 22" (55.9 cm) right of center |
| Side shift travel | 22" (55.9 cm) |
| Trenching widths available | 6", 8" & 10" (15.2 cm, 20.3 cm, 25.4 cm) |
| Motor options | Low flow (LF) & high flow (HF) motors |
| Hydraulic motor flow requirements Low flow High flow |
12-24 gpm (45.4-90.8 lpm) 24-40 gpm (90.8-151.4 lpm) |
| Hydraulic motor pressure range Low flow High flow |
2400-4500 psi (16.55-31.03 MPa) 2000-3600 psi (13.79-24.82 MPa) |
| Chain speed (Depending on skid steer flow & pressure ratings) Low flow High flow | 227-366 fpm (69-112 m/min) 221-373 fpm (67-114 m/min) |
| Motor case drain | Standard |
| Motor | Reversible |
| Chain tightener | Grease Cylinder |
| Crumber shoe | Floating |
| Depth indicator (Patent-pending) | Standard (Viewable from operator seat) |
| Roller guide bearings at boom head | Self-contained, ball bearings with triple-lip seals & metal shroud covers |
| Drive bearings between motor & drive sprocket | Self-contained, single & double row ball bearings with extra heavy duty seals |
| Spoil auger | Removable |
| Hydraulic coupler options | Standard and large flat face, connect under pressure, couplers |
| Chain options - numerous | Cup teeth on 2 or 4 pitch, scorpion w/cup teeth, or alligator w/cup teeth |
| Step and step pads | Heavy-duty, cast steel |
| Frame construction | Heavy duty 5/16" (8 mm) thick w/ 3/4" (19 mm) reinforced bar around three sides the bottom lock pin slots. |
| Trencher chain | 2.00" (5.1 cm) Pitch. 50,000 lb (22679.6 kg) tensile strength |
| Trencher chain side links | Anti-flex |
| Cup teeth | Hardened with hard facing |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.