Request A Quote
Features
3-Point or Pull-Type Configurations
3-Point Hitch
Designed for deep tillage with strength and durability in mind. Category 3, 3N, 4 & 4N 3-point hitch configurations are available dependent on machine configuration. 3-point hitches are integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.
Rear Lift Drawbar Pull-Hitch
Rear lift pull-hitch option available for all 4835-530F through 4835-1130F models for transport stability. The drawbar pull-hitch includes 280/70 R15 tires on the rear lift and 280/70 R15 front mounted gauge wheel tires.
Shank Mounts to Match Your Field Conditions
Shear-Bolt
Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern. Shear-bolt protection guards against shank damage from unexpected obstacles.
- Shear force: 10,000 pounds (approximate)
- 16” maximum shank working depth
- For non-rock conditions
Spring Reset
Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.
- 2,500 pound point load
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
PathFind’R™
Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.
- Basic spring reset design
- Makes deep ripping possible on contours or terraces
- Deflects impacts improving performance in rocky soils
- Smoother steering under full power with tracked tractors
- Reduces stress on implement frame and 3-point tractor hitch
- Not compatible with pull-type hitch
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
Shank & Point Options
A Variety of Options
The 4835 in-line ripper may be configured in many different ways to achieve your agronomic goals. Choose from a variety of shank, point and wing combinations to achieve your desired field finish. Surface field finish is primarily determined by the type of shank used with parabolic offering the most soil disturbance, followed by MRD and no-till. Compaction removal, residue incorporation and draft are determined by points and shank caps.
No-Till Shanks & Points
- Choice of ¾" no-till shank (normal conditions) or 1” no-till shank (extreme conditions)
- Austempered wear bar
- Choose from 1-3/4" or Double K® chromium carbide points with either 8” wing or low disturbance shank cap
Conservation Tillage Shanks & Points
- 1-1/4" MRD (minimum residue disturbance) shank
- Austempered wear bar
- Choice of Double K 7” wing ripper point or Double K 2-1/2” straight ripper point
Specifications
| SPECIFICATIONS | 4835-830F |
| Transport Width (ft/m) | 12'4" / 3.8 m |
| Frame Type | NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar |
| Number of Shanks | 8 |
| Shank Spacing (in/cm) | 30" / 76.2 cm |
| Working Width (ft/m) | 20' / 6.1 m |
| Spring Reset Shank Approximate Weight (lb /kg) | 7,800 / 3 538 |
| Shear Bolt Shank Approximate Weight (lb/kg) | 6,200 / 2 812 |
| STANDARD EQUIPMENT | |
| Hitch Type | Small Frame: CAT 3N, 3 and 4N Compatible with Parking Stands |
| Coulter Blades | 22" x ¼" Smooth, 450 lb (250 kg) Down Pressure |
| Shank Mount | Spring Reset: 2,500 lb Point Load, 20" Trip Height |
| Shanks | No-Till Shank, ¾" Thick (Very Low Surface Disturbance), Austempered Wear Bar, Chromium Carbide Shank Side Protectors |
| Points | 1-¾" Austempered Ductile Points (No-Till Shanks Only) |
| Shattering Wing | 8" Austempered Shattering Wings |
| Depth Control | Ratchet Jack Adjustable Gauge Wheels |
| Gauge Wheels | (2) 20.5" x 8", Load Range E |
| Transport Locks and Safety | Slow Moving Vehicle Sign, High Visibility LED Transport Light Kit |
| OPTIONAL EQUIPMENT | |
| Hitch Type | Drawbar Pull Hitch with Rear Lift Wheels, Includes (4) 280/70R15" Tires, Duals, (2) 280/70R15" Front Mounted Gauge Wheels, (1) 4" x 16" and (1) 4-½" x 16" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (Less Parking Stands) |
| Shank Mount | Rigid: Shear-Bolt Protected, 10,000 lb (Shear Force) |
| Shank Mount | Pivoting PathFind'r™ Spring Reset, 2,500 lb (Not Compatible with Pull Hitch) |
| Shanks | MRD Shank, 1-¼" Thick (Minimum Residue Disturbance), Austempered Wear Bar |
| Shanks | HD No-Till Shank, 1" Thick (Low Surface Disturbance), Austempered Wear Bar, Chromium Carbide Shank Side Protectors |
| Points | Double K® 2" Chromium Carbide Points (No-Till Shank Only) |
| Points | Double K® 7" Wing Ripper Points |
| Points | Double K® 2-½" Straight Ripper Point |
| Shank Cap | Low Disturbance Shank Cap (In Lieu of Wing) |
| Wing Gauge Wheels | (2) 20.5" x 8", Load Range E (One per Wing) |
| Closing Wheels | (2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (Limit Shank Soil Blowout) |
| Shank Stagger Kit | Not Applicable |
| OPERATING INFORMATION | |
| Recommended Operating Speed (mph/km/h) | 4 - 7 / 6 - 11 |
| Recommended Working Depth | 8" - 16" / 20 - 41 cm |
| Recommended Tractor Power Range (PTO hp/kW) | 35 - 45 PTO Horsepower per Shank / 26 - 34 kW |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.