Request A Quote
Features
3-Point Hitch
Designed for deep tillage with strength and durability in mind. This Category III, 3-point hitch is integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.
Drawbar Pull-Hitch (Small Frame)
The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Equipped with four 280/70 R 15 tires, the drawbar hitch provides excellent field flotation and depth control.
Drawbar Pull-Hitch (Large Frame)
The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Four 280/70 R15 tires rear and (2) 280/70 R15 tires on front mounted gauge wheels.
Shear-Bolt
Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern. Shear-bolt protection guards against shank damage from unexpected obstacles.
- Shear force: 10,000 pounds (approximate)
- 16” maximum shank working depth
- For non-rock conditions
Spring Reset
Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.
- 2,500 pound point load
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
PathFind’R™
Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.
- Basic spring reset design
- Makes deep ripping possible on contours or terraces
- Deflects impacts improving performance in rocky soils
- Smoother steering under full power with tracked tractors
- Reduces stress on implement frame and 3-point tractor hitch
- Not compatible with pull-type hitch
- 20” trip height
- 16” maximum shank working depth
- 36” underframe clearance
MRD Shanks, Points and Wings (Minimum Residue Disturbance)
Choose from a variety of MRD shank points and wings to achieve optimum residue level and surface appearance.
- 1-1/4” Profile
- Austempered ductile, reversible wear bar
- Welded chromium carbide side plates
2” Chromium Carbide Point
5” Shattering Wing
- Residue remaining: 51% to 65%
- Fracture: 36% to 52%
Low-Disturbance Shank Cap
- Residue remaining: 51% to 65%
- Fracture: 31% to 48%
¾” Chromium Carbide Point
5” Shattering Wing
- Residue remaining: 68% to 75%
- Fracture: 36% to 52%
Low-Disturbance Shank Cap
- Residue remaining: 68% to 75%
- Fracture: 31% to 48%
No-Till Shank, Points and Wings
The no-till point and 8” wing break up the compacted soil layer, while the narrow ¾” shank slips through the soil leaving up to 86% residue on the surface. With replaceable wear parts, this no-till design offers up to 50% operation cost saving versus competitors.
- ¾” profile
- High-tensile steel shank
- Austempered or chromium carbide points, wings and wear bar
- Chromium carbide side plates
- Residue remaining: Up to 86%
- Fracture: 55% to 70%
- Replaceable wear parts
2” Hard Surface Point
- Best performance for rocky conditions
- Residue remaining: 51% to 65%
- Fracture: 31% to 48%
Specifications
| SPECIFICATIONS | 4830-540R |
| Transport Width (ft/m) | 14'3" / 4.3 |
| Frame Type | 6" x 6" Double Rank Toolbar |
| Number of Shanks | 5 |
| Shank Spacing (in/cm) | 40" / 101 |
| Working Width (ft/m) | 16'8" / 5 |
| Spring Reset Shank Approximate Weight (lb /kg) | 4,010 / 1 819 |
| Shear Bolt Shank Approximate Weight (lb/kg) | 3,010 / 1 365 |
| STANDARD EQUIPMENT | |
| Hitch Type | CAT III 3-Point with Parking Stand |
| Coulter Blades | 22" 1/4" Smooth Coulter Blades, 450 lb (250 kg) Down Pressure |
| Shank Mount | Spring Reset: 2500 lb Point Load, 20" Trip Height |
| Shanks | No-Till Shank, 3/4" Thick (Very Low Surface Disturbance), Profile Wear Bar Austempered Ductile, Non-Reversible, Chromium Carbide Shank Side Protectors |
| Points | 1-¾" Austempered Ductile Points, 8" Austempered Shattering Wings |
| Shattering Wing | 5" Chromium Carbide Shatter Wings (MRD Shanks Only) |
| Depth Control | Ratchet Jack Adjustable Gauge Wheels |
| Gauge Wheels | (2) 20.5" x 8", Load Range E |
| Transport Locks and Safety | Slow Moving Vehicle Sign, High Visibility LED Transport Light Kit |
| OPTIONAL EQUIPMENT | |
| Hitch Type | Drawbar Pull Hitch Front Lift, Includes (4) 280/70 R15" Tires, Duals, (1) 4-1/4" x 10" and (1) 4" x 10" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (Less Parking Stands) |
| Shank Mount | Rigid: Shear-Bolt Protected, 10,000 lb (Shear Force) |
| Shank Mount | Pivoting Pathfind'r™ Spring Reset, 2500 lb |
| Shanks | MRD Shank, 1-1/4" Thick (Minimum Residue Disturbance), Reversible Austempered Ductile Wear Bar, Chromium Carbide Shank Side ProtectorsS |
| Shanks | HD No-Till Shank, 1" Thick (Low Surface Disturbance), Narrow Profile Wear Bar Austempered Ductile, Non-Reversible.Chromium Carbide Shank Side Protectors |
| Points | 2" Chromium Carbide Points |
| Points | 2" Welded Points (MRD Shanks Only) (Recommended for Rocky Areas) |
| Points | ¾" Chromium Carbide Points (MRD Shanks Only) |
| Shank Cap | Low Disturbance Shank Cap (In Lieu of Wing) |
| Wing Gauge Wheels | Not Applicable |
| Closing Wheels | (2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (Limit Shank Soil Blowout) |
| Shank Stagger Kit | 6" Offset Between Shanks |
| OPERATION INFORMATION | |
| Recommended Operating Speed (mph/km/h) | 4 - 7 / 6 - 11 |
| Recommended Working Depth | 8" - 16" / 20 - 41 cm |
| Recommended Tractor Power Range (PTO hp/kW) | 30 - 40 PTO hp per Shank / 22- 30 kW |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.