Request A Quote
Features
- Three-Section Folding Models in 25’, 30’ and 36′ Working Widths
- Designed for Improved Residue Flow Through the Machine
- Three Rows of Shanks on Overall 6” Spacing
- Two-Piece Edge Bent S-Tine Shanks for Better Leveling
- 23” Under Frame Clearance
- 18” Between Shanks, Minimum of 24” Between Rows
- 2” Reversible Points
- Maximum Shank Operating Depth of 5”
- Two-Row Coil Tine Harrow in Front of Rear Roller
- 8” Roller Axles
- 61mm Heavy-Duty Bearings
- 24” Notched Ductile Iron Wheels
- Rear Scrapers Standard on Notched Rollers
- From Transport Hitch Floats 25 Degrees Up and 17 Degrees Down
- Wings Float 6 Degrees Down
- Single Point Depth Control
- Wing Hydraulic Down Pressure
- Dual Transport Wheels
- (4) 320/70R15 Tires on 25’ Model
- (4) 380/55R X 16.5 Tires on 30’ Model
- (4) 480/45R17 Tires on 36′ Model
- Cat. III, IV or V Hitch
- Transport Height – 9’6” for 25′ and 30′ Model; 13’8″ for 36′ Model
- Transport Width – 14’8” for 25’ Model; 17’ for 30’ Model; 18’10” for 36′ Model
- LED Warning Lights and SMV Emblem
- Safety Chain Kit
- Powder Coat Paint
Specifications
| Model | WLB-3631-25 |
| Approximate Weight | 25,002 lbs. (11,341 kg) |
| Working Width | 25 ft. (7.6 m) |
| Transport Width | 14 ft. 8 in. (4.5 m) |
| Transport Height | 9 ft. 6 in. (2.9 m) |
| Overall Length (Transport) | 29 ft. (8.8 m) |
| Road Clearance | 15 in. (381 mm) |
| Type of Pulverizer Wheel - Front | 24 in. (609.6 mm) Notched Ductile Iron |
| Number of Pulverizer Wheels - Front | 77 |
| Type of Pulverizer Wheel - Rear | 24 in. (609.6 mm) Notched Ductile Iron |
| Number of Pulverizer Wheels - Rear | 77 |
| Rear Roller Scrapers | Standard |
| Roller Axle Size | 8 in. (203 mm) |
| Bearing Type | 61 mm Heavy-Duty |
| Type of Shanks | Heavy-Duty Two-Piece Edge Bent S-Tine Shank 1.75 in. x 0.625 in. (44.5 x 15.9 mm) |
| Number of Shanks | 49 |
| Nominal Shank Spacing | 6 in. (152 mm) |
| Maximum Shank Depth of Operation | 5 in. (127 mm) |
| Under Frame Clearance | 23 in. (584 mm) |
| Hitch | Pull-Type with Hydraulic Lift |
| Hitch Category | Cat. III, IV or V |
| Tire Size | (4) 320/70R15 |
| Hydraulic Circuits Required | 3 + Case Drain (+1 for Rear Hitch) |
| Wing Hydraulic Down Pressure | Standard |
| Hydraulic Tooth Control | Single Point Depth Control |
| Two-Row Coil Tine Harrow | Standard |
| Rear Hitch | Optional |
| Front Roller Scraper Kit | Optional |
| Land Leveler Kit | Optional |
| V-Leveler Kit | Optional |
| Rear Three Row Coil Tine Harrow Kit | Optional |
| LED Warning Lights & SMV Emblem | Standard |
| Safety Chain Kit | Standard |
| Powder Coat Paint | Standard |
| Horsepower Requirements | 10 to 12 HP (7.5 to 8.9 kW) per ft. |
| Recommended Operating Speed | 6 to 8 MPH (10 to 13 km/h) |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.