BCS Plastic Mulch Layer

• Using 4-foot rolls: Lays plastic mulch over 28-30" raised beds, or flat-lays mulch over a 36-40" wide flat bed.
• Using 3-foot rolls: Flat-lays mulch over a 26" wide flat bed.
• Extra set of disc "openers" included for use on raised beds.
• Raised beds can not exceed 3'' in height.
• Quick Hitch Tang included (requires Quick Hitch Bushing on tractor).
• Oval Quick Hitch pin hole allows the unit to "float".
• Side-to-side play at hitch point for steering ability if unit gets off course.
• Six height settings at Quick Hitch connection point.
• 2400' plastic mulch sold separately.
• Removable tool box sold separately.
• Drip Tape Layer accessory and drip tape rolls sold separately.
• Made in the USA.

Compatible with models 749 and up, the PML lays plastic mulch and simultaneously buries the edges of the plastic on both sides to keep it anchored to the soil.

Like any soil-working implement, this attachment performs differently in differing soil types, and needs to be adjusted accordingly. The "openers" (opens the furrows), “press wheels” (presses the plastic down into the furrows), and "closers" (close up the furrows to bury the plastic) are all easily adjustable horizontally and vertically. These 3 items must be adjusted in line with each other for proper performance. Additional vertical adjustments can be made at the tractor connection point, with several sets of flange connection mounting holes.

A prerequisite is that the soil needs to be well-worked, dry, and level. Even with perfect soil conditions, the PML typically requires some experimental adjustments to obtain optimal results. The adjustments must be equal on both sides of the unit. Measuring the shanks on the openers, closers, and press wheels to confirm the settings are all equal is recommended.

This PML is designed for use with a 2400' roll of plastic for best handling. It includes a set of “plow openers”, which are used for flat-beds, and a set of 12" disc-openers for use on raised beds. It has a "floating" connection point allowing the implement to follow slight ground contours and a small amount of side-to-side play for small course corrections. A Quick Hitch bushing must be installed on the tractor, since the unit's mounting hitch has an integrated Quick Hitch tang. Plastic Mulch sold by BCS America is non-toxic and PVC-free.

Installing plastic mulch almost certainly requires the use of drip tape to provide water to the plants. A Drip Tape Layer Kit is available to simultaneously lay one row of drip tape under the plastic as it is being installed. The flange where the tractor connects to the PML is offset from the frame, enabling the operator to perfectly center the drip tape within the growing bed. While up to two Drip Tape Layers may be installed, this set up can be quite heavy. If multiple lines of Drip Tape are required, it is recommended that the tape should be laid manually before the mulch is installed. A 1000' Drip Tape Roll is also available, which features 4'' emitter spacing.

To avoid installing the plastic mulch over wheel tracks, the tractor's wheels need to straddle the bed. To straddle 30” wide raised beds, most tractors will need a set of 16” Wheel Extensions installed. A 5x12 minimum tire size is recommended for adequate ground clearance.

A removable toolbox/storage bin is available and sold separately. The toolbox features two 18x3" compartments and straddles the frame of the implement. The toolbox is a great way to keep frequently used tools, like utility knives and wrenches, nearby while you work.

BCS America's Plastic Mulch Layer is proudly made in the USA.

Wheel Weights may also be required to provide additional traction.

Recommended Accessory: Wheel Weights provide additional traction
Accessories Specific to this Attachment: Plastic Mulch Layer Accessories