Request A Quote
Features
| FEATURES | BENEFITS |
| Surpassed rugged industry standards | All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
| Gearbox Seal Protection | Gearbox bottom seal protection for longer bearing life. |
| 130 Horsepower gearbox | A rugged heavy built gearbox capable of handling heavy cutting applications. |
| Cat. 4 driveline with 4-plate slip-clutch | Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in blade path. Standard slip-clutch offers convenience over shear-bolts. |
| Cat. II or III hitch with floating top link | Permits deck to follow the terrain for an even cut. |
| Quick Hitch Capability | Quick Hitch provides for fast hook-up. |
| Lower clevis type 3-Point hitch | Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design. |
| 84" Cutting width | Wide cutting width, Reduces cutting time in the field. |
| Heavy 10 gauge deck & 1/4" side skirt construction | 10 gauge deck can withstand more abuse than lighter gauge decks and 1/4" side skirts provide excellent reinforcement and also protect sides from debris being thrown against them from the blades. |
| Box tubing deck supports | Makes for a stronger rigid deck. |
| Fully welded deck | Robotic welded. Adds additional strength and deck integrity. |
| Extended cutter front | For increased material flow and added protection. |
| Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
| Deck Height 10 1/8" (RCF2784) 9 7/8" (RCR2684) |
Allows cutter to handle heavy cutting conditions. |
| 1 1/2" to 12" Cutting height | Provides for a wide range of cutting conditions. |
| High cutting capacity | Can cut brushy areas with saplings up to 3". |
| Full length skids with replaceable shoes | Full length skids protect side plate structure, replaceable shoes for convenience. |
| 1/2" x 4" Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
| Splined blade bar | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
| Oval stump jumper | Standard stump jumper aids in sliding over obstructions such as stumps, rocks and debris, which also helps protect gearbox output shaft. |
| High blade tip speed | Ensures clean cut. (14,369 fpm) |
| Available with single or dual tailwheel | Dual tailwheels offer greater stability in uneven terrain |
| 15" Laminated tailwheel | Laminated material is long lasting in rough conditions. Can't go flat. |
| 1 1/2" Heavy-duty spindle on tailwheel | Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly. |
| Optional Front Guarding | Protect against flying debris. Customer can choose to include single chain, double chain or rubber guarding. |
| Optional rear guarding | Protect against flying debris. Customer can choose to include single chain or double chain. |
| Standard rear metal band | Protects against flying debris. Acts as a baffle o help mulch cuttings into smaller pieces. |
Specifications
| Model | RCF2784 |
| Machine weight 3-Point single tailwheel 3-Point dual tailwheel Pull-type dual tailwheel |
1,354 lbs. with front & rear chain guards 1,427 lbs. with front & rear chain guards 1,632 lbs. with front & rear chain guards and hydraulic adjustment |
| 3-Point hitch | Category II & III with floating top linkage, quick hitch adaptable |
| Pull type tongue weight | 687 lbs. |
| Cutting width | 84" |
| Overall width | 89" |
| Overall length 3-Point single tailwheel 3-Point dual tailwheel Pull-type dual tailwheel |
132 1/2" 130 3/8" 159 1/4" |
| Deck height (bottom of deck to bottom of skid shoe) |
10 1/8" |
| Cutting height | 1 1/2" to 12" |
| Cutting capacity | 3" Diameter |
| Recommended tractor power take-off horsepower |
60-130 horsepower |
| Power take-off speed | 540 rpm |
| Gearbox ratio | 1:1.21 |
| Gearbox construction | Speed-up beveled gears, cast iron housing, 1 3/8"-6 spline input shaft and 2" output shaft |
| Gearbox oil capacity & type | 6.5 Pints of EP 80-90W gear lube |
| Deck construction | All welded deck |
| Deck material thickness | 10 Gauge |
| Side skirt material thickness | 1/4" |
| Skid shoes | 1/4" thick bolt-on replaceable skid shoes |
| Stump jumper | 3/16" x 24" x 38" Oval pan with 1" thick blade holder bar |
| Blades (2) | 1/2" x 4" x 31" Heat treated alloy steel free-swinging high lift |
| Blade bolts | Keyed with harden flat washers & lock nuts. |
| Blade tip speed | 14,369 FPM |
| Driveline | ASAE Category 4 |
| Driveline protection | 4 Plate slip clutch |
| Tailwheel mount | Welded A-arm and caster fork with 360 degree swivel |
| Tailwheel | 4" x 8" x 15" Laminated tire with cast iron hub |
| Front guard | Rubber guard (optional) Single chain guard (optional) Double chain guard (optional) |
| Rear guard | Metal band (standard) Single chain guard (optional Double chain guard (optional) |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.