Request A Quote
Features
| Features | Benefits |
| Quick Hitch Adaptable | Quickly and easily attach chipper to tractor with one person. |
| 1/4" Thick Cutting Knife | Rotor features 2 replaceable 1/4" hardened steel cutting edges |
| Knives Can Be Rotated When One Cutting Edge Is Worn | Each knife has two cutting edges to extend knife life. When one edge is worn, rotate knife 180° to a new cutting edge. Less downtime required to sharpen knives |
| Knives Are Replaceable | Can replace knives when all cutting edges are worn out. |
| Two V-Belts | Designed to handle shock loads. |
| Spring Loaded Adjustable Idler | Allows for constant and proper tension on belt. |
| 2-Bolt Flanged Bearings | Improves bearing life. |
| Cat. ll Shear-Bolt Driveline | Shear-bolt protects the unit when obstructions are encountered. |
| Skid Extension Supports | Allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints |
| Adjustable Rotating Discharge Chute With Rotation Stops | Directs direction wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator feeding product toward the feed chute. |
| Adjustable Deflector Chute | Helps control the distance wood chips will be discharged away from the Wood Chipper |
| 9,090 FPM Knife Speed | For cleaner cut and better discharge of wood chips. |
| Self-Feeding System | Product is pulled in by the sharp cutting knives with each pass of a knife. Operator can be retrieving the next object to load while the unit is chipping the last limb loaded into the feed chute. |
Specifications
| Model | WC1503 |
| HP Required | 12 to 30 HP (Minimum 25 HP for maximum capacity) |
| Weight | 369 lbs. |
| Hitch | Cat.1 w/ Quick Hitch capabilities |
| Upper Hitch Plate Thickness | 1/4" |
| Main Frame Thickness | 3/16" |
| Rotor Housing Thickness | 3/16" |
| PTO Speed | 540 RPM |
| Driveline Category | Cat. 2 with shear bolt |
| Main Drive Pulley Diameter | 16.35" |
| Rotor Pulley Diameter | 4.5" |
| Belts | 2 single B section |
| Belt Tensioners | Spring loaded with adjustment |
| Rotor Size | 17.5" |
| Rotor Speed | 1984 RPM |
| Chip Capacity | 3" |
| Hopper Inlet Opening | 14"x 15" |
| Chipper Inlet Opening | 6" x 3" |
| Spout Discharge Opening | 3 1/4" Square |
| Cutting Knife | Reversible and Replaceable |
| Number of Knives | 2 |
| Knife Size | 2.5" x 2" x 1/4" |
| Knife Material | Hardened Steel (Specifically designed for chipping) |
| Feed System | Self-feed |
| Chip Chute Position | 270 degrees |
| Feed Height Above Ground | 35" (Without adjustable skids) |
| Feed Height Adjustment | 6 Settings (Includes without adjustable skids) |
| Color | Orange, Green & Beige |
Farm & Ranch Supplies
Our hardware department offers a wide selection of STIHL Power Equipment, fencing, irrigation supplies, and quality power and hand tools. We also have a full-service tack shop and western clothing department. So as you can see we are your one-stop-shop for all of your farming, ranching, and residential needs. Plus, we service all of the equipment we sell in our small engine repair shop. Our mechanics hold several certifications including STIHL silver or gold, Honda, Kohler, Briggs and ExMark.